Hygiene Stations for Reliable Personal Hygiene in Industry & Food Production.
Hygiene stations from Heim-EDT support facility hygiene at personnel access points. Depending on the configuration, the systems combine boot sole cleaning, hand disinfection, hand wash basins, soap dispensers, paper towel dispensers, waste bins, and an electromechanical turnstile.
Hygiene Stations of the KS 1000 and DSR 1000 Series.
The KS 1000 series is designed as a complete personal hygiene station. It includes a walk-through sole cleaning unit with a soap dispenser, hand wash basin, towel dispenser, waste bin, sensor-controlled hand disinfection, and an electromechanical turnstile. The DSR 1000 series is a walk-through sole cleaning system explicitly built for cleaning and disinfecting boot and shoe soles, equipped with hand disinfection and an electromechanical turnstile. For both series, entry through the turnstile is only released after successful hand disinfection. The shoe sole cleaning is triggered automatically upon stepping onto the brush rollers. The industrial hygiene stations are manufactured from high-quality 1.4301 stainless steel and operate at 400 V, 50 Hz, 1.5 A, featuring a 24 V control voltage, 1 kW power consumption, and IP 64 protection class.
Hygiene Locks for Various Areas of Application.
Heim-EDT hygiene locks are used in areas where personnel must undergo defined hygiene steps before entering an operational zone. Depending on the requirements, complete hygiene stations of the KS 1000 series or continuous sole cleaning systems of the DSR 1000 series are available.
Large-Scale Catering & Gastronomy
For large-scale catering and gastronomic operations, hygiene locks can be used to support hand hygiene and sole cleaning at personnel access points. Depending on the configuration, the KS 1000 series combines soap dispensers, hand washbasins, paper towel dispensers, waste bins, hand disinfection units, sole cleaning units, and electromechanical turnstiles.
Mobile Hygiene Locks & Container Solutions
For special structural situations or customized system concepts, requirements should be coordinated directly with Heim-EDT. Customer-specific adjustments are possible.
Sole Cleaning for Industry
The DSR 1000 series is designed as a continuous sole cleaning system for the cleaning and disinfection of shoe soles. The system features hand disinfection and an electromechanical turnstile. The brush motors and the solenoid valve for injecting cleaning and disinfection agents are activated by the pressure exerted when stepping onto the brush rollers.
Butcher Shops & Meat Processing
In butcher shops and meat processing plants, hygiene locks support operational hygiene at access points to hygiene-sensitive areas. Sole cleaning is triggered upon entering the brush rollers. The turnstile release occurs after hand disinfection.
Technical Data & Model Overview of Industrial Hygiene Stations.
The hygiene stations of the KS 1000 and DSR 1000 series are made of stainless steel 1.4301 (304). The systems operate with 400 V, 50 Hz, 1.5 A, 24 V control voltage, and 1 kW power. The protection class is IP 64.
The available model sizes differ primarily in brush length and overall length.| Model | Dimensions (Brush Length / Overall Length) | Connected Loads |
| DSR 1000 Mini | Brushes: 400 mm / Overall: 1472 mm | 400 V, 50 Hz, 1.5 A, 24 V, 1 kW |
| DSR 1000-10 | Brushes: 500 mm / Overall: 1612 mm | 400 V, 50 Hz, 1.5 A, 24 V, 1 kW |
| DSR 1000-11 | Brushes: 600 mm / Overall: 1712 mm | 400 V, 50 Hz, 1.5 A, 24 V, 1 kW |
| DSR 1000/15 | Brushes: 1000 mm / Overall: 2112 mm | 400 V, 50 Hz, 1.5 A, 24 V, 1 kW |
| KS 1000-10 | Brushes: 400 mm / Overall: 1620 mm | 400 V, 50 Hz, 1.5 A, 24 V, 1 kW |
| KS 1000-11 | Brushes: 500 mm / Overall: 1712 mm | 400 V, 50 Hz, 1.5 A, 24 V, 1 kW |
| KS 1000-15 | Brushes: 900 mm / Overall: 2112 mm | 400 V, 50 Hz, 1.5 A, 24 V, 1 kW |
| KS 1000-18 | Brushes: 1200 mm / Overall: 2390 mm | 400 V, 50 Hz, 1.5 A, 24 V, 1 kW |
| KS 1000-20 | Brushes: 1400 mm / Overall: 2590 mm | 400 V, 50 Hz, 1.5 A, 24 V, 1 kW |
| KS 1000-25 | Brushes: 1900 mm / Overall: 3112 mm | 400 V, 50 Hz, 1.5 A, 24 V, 1 kW |
Modular Extensions and Configuration Concepts for your Hygiene Station.
The KS 1000 and DSR 1000 series are available in various lengths. Additionally, numerous accessory and expansion modules are available, such as document holders, wastewater lifting pumps, canister empty alarms, exit release buttons, shaft cleaning, RFID integration, emergency stop buttons, and integrated Dyson hand dryers.
Continuous sole cleaning system DSR 1000 Mini for confined access areas
The DSR 1000 Mini is a compact continuous sole cleaning system with a brush length of 400 mm and an overall length of 1472 mm.
The system is designed for cleaning and disinfecting shoe soles and is equipped with hand disinfection and an electromechanical turnstile. The brush motors and the solenoid valve for injecting cleaning and disinfecting agents are activated by the pressure applied when stepping onto the brush rollers.
Medium continuous model DSR 1000-11 with extended brush section
The DSR 1000-10 is a continuous sole cleaning system with a brush length of 500 mm and an overall length of 1612 mm.
It is designed for the cleaning and disinfection of shoe soles. The system features hand disinfection and an electromechanical turnstile. Activating the hand disinfection triggers a single release of the turnstile.
Continuous sole cleaning system DSR 1000/15 for medium personnel flows
The DSR 1000/15 is a continuous sole cleaning system with a brush length of 1000 mm and an overall length of 2112 mm.
The system is made of stainless steel 1.4301 (304) and features an IP 64 protection class. The brush motors and the solenoid valve for injecting cleaning and disinfecting agents are activated by the pressure applied when stepping onto the brush rollers. The turnstile is released after the hand disinfection is activated.
Complete hygiene station KS 1000-10 for seamless personnel hygiene in single-shift operations
The KS 1000-10 is a complete hygiene station with a brush length of 400 mm and an overall length of 1620 mm.
The system combines continuous sole cleaning, a soap dispenser, hand wash basin, towel dispenser, waste bin, sensor-controlled hand disinfection, and an electromechanical turnstile. Shoe sole cleaning is triggered by the pressure applied when stepping onto the brush rollers.
Complete hygiene station KS 1000-15 for commercial kitchens and medium-sized industry
The KS 1000-15 is a complete hygiene station with a brush length of 900 mm and an overall length of 2112 mm.
The process includes a sensor-controlled soap dispenser, a sensor-controlled hand wash basin, hand drying with paper towels, sensor-controlled hand disinfection, turnstile release, and shoe sole cleaning triggered by the pressure applied when stepping onto the brush rollers.
High-performance hygiene station KS 1000-20 HDI for intensively used main entrances
The KS 1000-20 HDI is a version of the KS 1000 complete hygiene station. The system is equipped with continuous sole cleaning, a soap dispenser, hand wash basin, towel dispenser, waste bin, sensor-controlled hand disinfection, and an electromechanical turnstile.
The KS 1000-20 is listed in the model overview with a brush length of 1400 mm and an overall length of 2590 mm. Material, connected loads, and protection class correspond to the KS 1000 series.
Special hygiene station KS 1000 with integrated boot shaft cleaning optionBoot shaft cleaning is available as an accessory for the KS 1000 series. Additionally, the SR 3 module and SR Dry or dry sole cleaning are listed as accessories.
The exact configuration should be coordinated with Heim-EDT depending on the application and structural situation.Accessories & Categories.
The hygiene stations of the KS 1000 and DSR 1000 series can be supplemented with accessories depending on the application and spatial conditions.
Document holderExit release buttonRFID integration
Wastewater lifting pumpCanister empty alarm 5 kg / 24 kgCanister cover 5 kg / 24 kg
Boot shaft cleaningModule SR 3SR Dry / Sole dry cleaning
Emergency stop buttonPlombiert emergency stop buttonAcoustic buzzer signalDyson hand dryer integration
Custom adjustments are fully possible. The perfect execution will be coordinated based on access situations, space limitations, available connections, and your desired hygiene workflow.
The Hygiene Process in 6 Steps.
Our walk-through hygiene stations guarantee a seamless, forcibly guided process for maximum facility safety:
- Soap Dispensing: The sensor-controlled dispensing ensures the correct dosage to start the cleaning process.
- Hand Washing: A minimum duration of 5 seconds is configured to ensure thorough pre-cleaning of the hands.
- Hand Drying: Following cleaning, hygienic hand drying is performed to prepare the skin for disinfection.
- Hand Disinfection: This critical step is monitored by sensors to guarantee the complete elimination of pathogens.
- Turnstile Release: Only after successful completion of all prior hygiene steps does the electromechanical turnstile open automatically for 2 seconds.
- Sole Cleaning with Sanitization: While passing through, the shoe and boot soles are simultaneously mechanically cleaned and disinfected by the integrated brush rollers.
Challenges and Our Technical Solutions.
HEIM - EDT | THE RIGHT CHOICE.
Not only do our years of experience with washing systems, hygiene barriers, and operational equipment speak for us, but also our satisfied customers and partners. We don’t just offer you solutions – we develop shared concepts tailored perfectly to your needs and stand by your side for any questions, concerns, and challenges. Reach out to us comfortably and without obligation for more information, pricing, and further details.
Frequently Asked Questions
A hygiene station is a technical installation placed at personnel access points. It enforces defined sanitization steps before employees enter sensitive production environments. Depending on the design, it combines boot sole cleaning, hand disinfection, and electromechanical turnstile control. The KS 1000 series acts as a complete hygiene station, while the DSR 1000 series acts as a walk-through sole cleaning station with integrated hand sanitization.
A hygiene station with an integrated turnstile technically guarantees your hygiene workflow. Access is mechanically locked until the sensors detect successful hand disinfection. This automated process ensures 100% compliance among staff, unlike open, non-restricted sanitizing stands.
The configuration depends entirely on your personnel traffic, available space, and required hygiene levels. For tight hallways, a walk-through sole cleaner like the DSR 1000 series is ideal. If soap dispensing, washing, drying, and disinfection are required in a single unit, a complete personal hygiene station like the KS 1000 series is recommended.
Our industrial hygiene stations for the food industry are built from robust 1.4301 stainless steel. Standard electrical properties are 400 V, 50 Hz, 1.5 A, 24 V control voltage, and 1 kW total power consumption, adhering to protection class IP 64. Brush lengths range from 400 mm up to 2000 mm depending on the model.
Yes, custom engineering is a core strength of Heim-EDT. We adapt our KS 1000 and DSR 1000 technology to special spatial layouts, mobile setups, or container-integrated systems. Please contact us directly to coordinate the structural details.
For facilities where high boots are standard, we offer specialized boot shaft cleaning modules as an integration or standalone accessory (such as the SR 3 module or specialized sole-dry units). This ensures thorough mechanical cleaning of the entire boot, not just the sole.
The KS 1000 and DSR 1000 series described here are explicitly optimized for personal and staff hygiene. For drive-over floor sanitation systems or heavy intralogistics vehicle cleaning, please contact our team separately so we can evaluate the technical feasibility and propose a custom industrial solution.
Yes, Heim-EDT is a direct manufacturer. We config and supply the entire KS 1000 and DSR 1000 series directly to businesses worldwide. Contact our sales team for an individual project consultation, technical drawings, and a commercial quote tailored to your facility.
