Can Washer for effective cleaning of Cans.

Our Can Washer / Can Washing Machine is made of high-quality stainless steel and has hygienic design in compliance with HACCP standardization. The Washing equipment is adaptable to various sizes of the goods, components, Cans, boxes etc. regardless of material such as Metals, Plastic, Silicon, wood, glass and more.

Capacity: 100 - 2.000 Cans per hour.

Stainless steel can washer

Product description: Can Washer.

Can washers from the company Heim – EDT GmbH is the optimal solution for washing various sizes of containers/Cans and custom sizes (depending on the category). Our cleaning equipment is always designed with hygiene as top priority and equipped with latest technology for fast and effective cleaning of Cans. These Can washers are ideally split into two main zones; washing and rinsing zone.

Heim - EDT: Can Washer. 


Main-Washing zone.

Cans are thoroughly washed from all sides and inside in a circulating washing zone with a sophisticated water jet spraying system. This cleaning operation is extremely optimised for best cleaning results within a very short range of time, as the Cans are continuously transported inside the washing tunnel. The spraying unit is often customised based on the shape and size of the Can and are critical parameters for choosing optimal placement of water jet nozzles.

The preliminary washing zone eliminates all the contamination thoroughly using a sophisticated high pressure water spray system. In most cases our inbuilt filtration system enables an efficient reuse of water, thus saving an essential resource for you. Depending upon the level of contamination the water used in the pre-wash cycle is separated and given an individual outlet to avoid contamination of fresh water in the tank.  


Fresh water Rinsing zone.

In the rinsing zone, the Cans are rinsed with fresh water and thermally disinfected. Also, we offer chemical disinfectant as an option in this operation. This water is then optimally directed into the tank main washing zone of the machine and then reused. This unique process is made to achieve best washing results of the containers and Cans without pH carry-over with minimum consumption of water, chemicals, and energy.


Drying zone.

On request, a drying module can be integrated into the Can washing machine. The drying process is efficiently timed for quick drying. In the drying zone, the Cans are air-dried with cold/room-temperature air from all sides by a high-pressure blower unit which gushes out the water in the pockets of the Can and evaporates the water on the surfaces. The “EDT-Guide-Booster” cold air blowing system: this is in the extension of the equipment after the neutral zone. The high air flow rate ensures that a drying efficiency of 80 to 90% is achieved

Can drying option ensures faster reuse of your Cans and can be crucial in certain use-cases for food Industry and medical Industry.

Our experience with industrial washing systems in numbers.
Cleaned goods
Systems in use
Can Washer.

Information Can Washer.

The following goods can be cleaned in our washing machines:

  • Metal Cans
  • Plastic Cans
  • Disposable Cans
  • And more types of cans based on customer specifics

All our Can washing machines can be equipped with the following modules or accessories:

  • Infeed Conveyor
  • Outfeed Conveyor
  • Drying Module
  • Spin dryer for drying
  • Application specific-water filtration
  • Trash-bins
  • Chemical dosing pump
  • Fume extractor
  • And other modules on customer’s request

If your desired product specification is not listed, please contact us directly and we will design the machine according to your requirements. For detailed pricing and information, please contact us directly.

Below are the technical data of a Can washer for cleaning 200 cans per hour:

  •         Machine dimension: 3.500x600x1.660mm
  •         Material: stainless steel 1.4301 T=2,0mm
  •         cycle time: 60 seconds
  •         Tank capacity: 400 liters
  •         Disinfection time: approx. 8 – 12 seconds
  •         Washing temperature: 40 – 65 °C Adjustable
  •         Nozzles: Clip-eyelet (rotatable flat jet nozzles)
  •         Filter system: stainless steel 1.4301 Filter tray, hole 1,5 mm,
  •         comfortable and easily accessible in drawer
  •         Power supply: 400V / 50Hz
  •         Control voltage: 24V
  •         Heating system
  •         System: Electric screw-in heater
  •         Electrical power :1 x 6 kW
  •         Water connection :1/2″ 1 – 10 bar, cold or hot water connection
  •         Water outlet: 1 ½” ball valve

The dimensions and components of the can washing machines are adapted to the requirements of your company and the prices vary.

Can washer

Industrial can washing systems directly from the manufacturer.​

Products of the machine manufacturer Heim – EDT GmbH, such as can washing systems, are the optimal solution for washing product-specific cans. The can washing systems feature a hygienic design, unparalleled quality, and innovative technologies for rapid and effective cleaning. Depending on their type and system, these washing systems are also referred to as can washing machines or can washers. A can washing system can be divided into a washing zone and a rinsing zone.


Not only do our years of experience with washing systems, hygiene barriers, and operational equipment speak for us, but also our satisfied customers and partners. We don’t just offer you solutions – we develop shared concepts tailored perfectly to your needs and stand by your side for any questions, concerns, and challenges. Reach out to us comfortably and without obligation for more information, pricing, and further details. 

Can washer against white background

Experience in design and manufacturing of Can washing machines.

As a long-standing manufacturer of various types of Can-washing machines, we know the crucial points which are essential for compliance with hygiene standards in medical industries, food industries, automotive industries and across various other Industries.

Our experts at Heim EDT GmbH offer you the best guidance in selecting the right Can washing machine and are guaranteed to find the perfect solution. We as a vendor design, manufacture and assemble our machines for our customers at our headquarters in Satteldorf. We offer you ideal solutions at fair and attractive prices, the delivery of the machinery takes place after verbal and written order confirmations. Our machinery can directly be integrated to your logistics or production during or before your building/facility construction phase.